Mortar
Product container · 1 / 2
Universal product and project photography. Lighting and screens affect color. Photos do not change with format selection.
Sealer · Universal Hardscapes
Ultra Wet Look — Paver Sealer
For homeowners and contractors. Call or email our team to confirm quantities, availability and pricing, and finalize your purchase.
Loading product choices…
Technical Specifications
- Coverage Rate
- 150–200 sq. ft. per gallonCoverage varies depending on paver texture, joint width, and surface absorption.
- Number of Coats
- At least 2 coats recommendedTypically applied as 1 flood coat followed by 1 top coat.
- Dilution Ratio
- 1 part water to 1 part sealerMix thoroughly for approximately 2 minutes before use.
- Dry Time
- Approximately 1 hour in sunny conditionsShaded areas, high humidity, or cooler temperatures may extend dry time.
- Foot Traffic
- 24 hours
- Vehicular Traffic
- 48 hoursAvoid sharp turns or sudden vehicle braking during early curing.
- Typical Reseal Interval
- 2–3 yearsActual interval depends on UV exposure and traffic wear.
Compatibility & Application Notes
Joint Sand / Polymeric Sand
This sealer is designed to provide structural joint stabilization with standard joint sand, reducing the need for polymeric sand in applicable installations.
If polymeric sand is already installed, make sure it is fully cured, completely dry, and free of surface dust or residue before applying sealer. Residual moisture or dust can contribute to visible haze.
Natural Stone Compatibility
Ultra Wet Look can be used on suitable concrete pavers, clay pavers, travertine, and natural-stone surfaces.
Because natural stone may absorb sealer differently than concrete pavers, apply thin, even coats and avoid pooling.
Always confirm compatibility with the exact material and test in an inconspicuous area before treating the full surface.
Before You Apply
- Surface must be clean and dry before sealing.
- Remove dust, dirt, efflorescence, and other surface contamination.
- Confirm compatibility with the exact paving or stone material.
- Do not apply over trapped moisture.
- Test a small inconspicuous area first.
- Follow the product label and current manufacturer instructions.
Curing & Return to Use
- Foot traffic: after 24 hours
- Vehicular traffic: after 48 hours
- Avoid sharp turning, sudden braking, or heavy stress during early cure.
Maintenance / Resealing
Typical resealing intervals are approximately every 2–3 years, depending on sun exposure, traffic, wear, maintenance, and surface conditions.
Application results depend on surface preparation, material compatibility, environmental conditions, and proper use.
Product story
About Ultra Wet Look — Paver Sealer
Ultra Wet Look is a modified acrylic urethane paver sealer supplied in a 5-gallon pail. Its glossy, wet-look finish is the defining visual choice: it is intended for customers seeking that appearance rather than the untreated look of a paving surface.
Before choosing a sealer, identify the existing paver material and any previous treatment. Ask Universal for the current product instructions and confirm compatibility with the exact surface. Container size alone does not establish coverage, the number of coats or the result on your installation.
Explore the paver accessories range alongside the materials in your project. Discuss preparation, application and maintenance requirements using the product documentation before ordering or applying the sealer.
For preparation, resealing and finish comparisons, read How Often Should You Seal Pavers in Florida?.
Material selection, together
Why Choose Universal Hardscapes?
Care as part of selection
Universal carries pavers and related accessories. Bring the exact paving material and desired finish into the conversation when choosing a treatment.
Browse paver accessoriesProduct information first
Request the current instructions from our team and confirm compatibility and quantities for the actual surface before purchasing.
Ask about this sealerServing Florida projects
Where We Serve
From our Tampa base, we work with homeowners and contractors in Orlando and across Tampa Bay, including St. Petersburg. We also serve Sarasota, Naples and Fort Myers. Tell us your project location so we can confirm product availability and order arrangements.
Planning a visit? Our Tampa plant serves business customers, while the Tampa showroom welcomes all customers. Contact the location before traveling to confirm hours and your material enquiry.
Find your palette
Find the right product.
Select a material to view its own photos and published options.
The details behind the design
Technical resources.
Confirm the exact product, application, quantities and current specifications before ordering. For masonry, review structural requirements with your project professional.
Continue your material search